Company News
-
The solution to the problems in the welding process of the hdpe pipe welding machine
During the welding process of the pipe fittings hot melt welding machine, if the temperature is too low, after the end of the hot welding, it can be seen that the column head is small, the components are relatively loose, and even they can be separated. If you observe the thermostat at this time...Read more -
What is the cooling process of the Butt fusion welding machine?
When the hot-melt butt welder is operating, reduce drag resistance as much as possible, and clamp the spigot end of the pipe or pipe fitting on the butt welder; check whether the butt welder matches the pipe diameter and the regular butt cycle; move the movable fixture, Plane the end of the tube...Read more -
HDPE Hydraulic Butt Fusion Welding Machine Problem solution
Hydraulic butt fusion welding machine failures mainly include the following and related solutions: Fault 1. After plugging in, the motor of the hydraulic station rotates and a humming sound is heard, but the hydraulic push rod will not move; solution: first check whether the hydraulic oil in the...Read more -
How to handle electrofusion welding machine common problems?
The models of electrothermal fusion, heat shrinkable belt, electrothermal fusion welding machine and other products are different. Our products are widely sold. If you have any demand, please contact us. Let’s learn about the common problems of electric fusion welding machine The product m...Read more -
What problems should be paid attention to when buying a cutting machine?
There are many details to pay attention to when purchasing a multi-angle cutting machine, because only paying attention to the details can ensure that the final purchased product has a good performance in the application. So what problems should be paid attention to when buying a multi-angle cut...Read more -
Why workshop fitting welding machine price much differents?
When the price of multi angle cutter is in trouble, it indicates that the price is changing constantly. So what factors affect the price, the following is the question.Let’s make a brief introduction to the questions, hoping to help those in need. Material use: Although there are many mate...Read more -
Happy New year
Happy New year 2020 is a tough year, our work and life have been affected to varying degrees by the outbreak. But Lechuang is still grateful, in such a special period.We received a lot of suppo...Read more -
PE butt welding machine safety operation rules
1. Preparation before use ● Check the input voltage specification of the welding machine. It is strictly prohibited to connect other levels of voltage, so as to prevent the welding machine from burning and working. ● According to the actual power of the equipment, correctly select the power wir...Read more -
Is PE pipe suitable for potable water applications?
Polyethylene pipeline systems have been used by our customers for drinking water supply since their introduction in the 1950s. The plastics industry has taken great responsibility in ensuring that the products used do not adversely affect water quality. The range of tests undertaken on PE pipes ...Read more -
Five stages of PE pipe welding process
There are usually five stages of hot-melt butt joint, namely heating stage, endothermic stage, switching stage, welding stage and cooling stage. 1. Welding preparation: place the pipe fitting between the moving clamp and the fixed clamp, and the distance between the middle two pipe orifices shal...Read more
